[Buildroot] [PATCH v3] configs/friendlyarm_nanopi_neo2_defconfig: new board
Scott Fan
fancp2007 at gmail.com
Thu Nov 2 09:02:40 UTC 2023
Add support for the FriendlyARM NanoPi NEO2 with mainline components:
- U-Boot 2023.10
- Linux 6.1.60
Board's wiki page:
- https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO2
Signed-off-by: Scott Fan <fancp2007 at gmail.com>
---
Changes v1 -> v2:
- Fix issues from 'utils/docker-run make check-package'
- Add atf custom version in the defconfig
- No need for sudo to run sync
Changes v2 -> v3:
- Update patch file, add the upstream tag
Signed-off-by: Scott Fan <fancp2007 at gmail.com>
---
board/friendlyarm/nanopi-neo2/extlinux.conf | 4 +
board/friendlyarm/nanopi-neo2/genimage.cfg | 40 ++++++++++
board/friendlyarm/nanopi-neo2/post-build.sh | 8 ++
board/friendlyarm/nanopi-neo2/readme.txt | 34 ++++++++
...fitImage-source-file-for-NanoPi-NEO2.patch | 77 +++++++++++++++++++
configs/friendlyarm_nanopi_neo2_defconfig | 49 ++++++++++++
6 files changed, 212 insertions(+)
create mode 100644 board/friendlyarm/nanopi-neo2/extlinux.conf
create mode 100644 board/friendlyarm/nanopi-neo2/genimage.cfg
create mode 100755 board/friendlyarm/nanopi-neo2/post-build.sh
create mode 100644 board/friendlyarm/nanopi-neo2/readme.txt
create mode 100644 board/friendlyarm/nanopi-neo2/uboot/0001-ARM-Add-default-fitImage-source-file-for-NanoPi-NEO2.patch
create mode 100644 configs/friendlyarm_nanopi_neo2_defconfig
diff --git a/board/friendlyarm/nanopi-neo2/extlinux.conf b/board/friendlyarm/nanopi-neo2/extlinux.conf
new file mode 100644
index 0000000000..04aea276a2
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo2/extlinux.conf
@@ -0,0 +1,4 @@
+label friendlyarm-nanopi-buildroot
+ kernel /Image
+ devicetree /sun50i-h5-nanopi-neo2.dtb
+ append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
diff --git a/board/friendlyarm/nanopi-neo2/genimage.cfg b/board/friendlyarm/nanopi-neo2/genimage.cfg
new file mode 100644
index 0000000000..54465ca7fe
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo2/genimage.cfg
@@ -0,0 +1,40 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-h5-nanopi-neo2.dtb",
+ "extlinux"
+ }
+ }
+
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition spl {
+ in-partition-table = "no"
+ image = "sunxi-spl.bin"
+ offset = 8K
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 40K
+ size = 1M # 1MB - 40KB
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/friendlyarm/nanopi-neo2/post-build.sh b/board/friendlyarm/nanopi-neo2/post-build.sh
new file mode 100755
index 0000000000..9cb196ac8d
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo2/post-build.sh
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname "$0")"
+
+# Parse BINARIES_DIR variable from arguments while missing in environment variable
+[ -n "${BINARIES_DIR}" ] || BINARIES_DIR="$1"
+
+install -m 0644 -D "${BOARD_DIR}/extlinux.conf" "${BINARIES_DIR}/extlinux/extlinux.conf"
diff --git a/board/friendlyarm/nanopi-neo2/readme.txt b/board/friendlyarm/nanopi-neo2/readme.txt
new file mode 100644
index 0000000000..c896a57525
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo2/readme.txt
@@ -0,0 +1,34 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the NanoPi NEO2. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Wiki link:
+https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO2
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make friendlyarm_nanopi_neo2_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sync
+
+Insert the micro SDcard in your NanoPi NEO2 and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/board/friendlyarm/nanopi-neo2/uboot/0001-ARM-Add-default-fitImage-source-file-for-NanoPi-NEO2.patch b/board/friendlyarm/nanopi-neo2/uboot/0001-ARM-Add-default-fitImage-source-file-for-NanoPi-NEO2.patch
new file mode 100644
index 0000000000..a1a13c67c0
--- /dev/null
+++ b/board/friendlyarm/nanopi-neo2/uboot/0001-ARM-Add-default-fitImage-source-file-for-NanoPi-NEO2.patch
@@ -0,0 +1,77 @@
+From e7f237e5ded90bc422ab9254ce8f7530c163cf3a Mon Sep 17 00:00:00 2001
+From: Scott Fan <fancp2007 at gmail.com>
+Date: Thu, 2 Nov 2023 08:03:39 +0800
+Subject: [PATCH] ARM: Add default fitImage source file for NanoPi NEO2 board
+
+Upstream: https://github.com/u-boot/u-boot/pull/443
+
+Signed-off-by: Scott Fan <fancp2007 at gmail.com>
+---
+ board/friendlyarm/nanopi-neo2/fit_spl_atf.its | 42 +++++++++++++++++++
+ configs/nanopi_neo2_defconfig | 1 +
+ 2 files changed, 43 insertions(+)
+ create mode 100644 board/friendlyarm/nanopi-neo2/fit_spl_atf.its
+
+diff --git a/board/friendlyarm/nanopi-neo2/fit_spl_atf.its b/board/friendlyarm/nanopi-neo2/fit_spl_atf.its
+new file mode 100644
+index 0000000000..18b5d0d681
+--- /dev/null
++++ b/board/friendlyarm/nanopi-neo2/fit_spl_atf.its
+@@ -0,0 +1,42 @@
++/dts-v1/;
++
++/ {
++ description = "Configuration to load ATF before U-Boot";
++ #address-cells = <1>;
++
++ images {
++ uboot {
++ description = "U-Boot (64-bit)";
++ data = /incbin/("u-boot-nodtb.bin");
++ type = "standalone";
++ arch = "arm64";
++ compression = "none";
++ load = <0x4a000000>;
++ };
++ atf {
++ description = "ARM Trusted Firmware";
++ data = /incbin/("bl31.bin");
++ type = "firmware";
++ arch = "arm64";
++ compression = "none";
++ load = <0x44000>;
++ entry = <0x44000>;
++ };
++ fdt_1 {
++ description = "sun50i-h5-nanopi-neo2";
++ data = /incbin/("arch/arm/dts/sun50i-h5-nanopi-neo2.dtb");
++ type = "flat_dt";
++ compression = "none";
++ };
++ };
++ configurations {
++ default = "config_1";
++
++ config_1 {
++ description = "sun50i-h5-nanopi-neo2";
++ firmware = "uboot";
++ loadables = "atf";
++ fdt = "fdt_1";
++ };
++ };
++};
+diff --git a/configs/nanopi_neo2_defconfig b/configs/nanopi_neo2_defconfig
+index 95dd56aa04..2a75fc01d8 100644
+--- a/configs/nanopi_neo2_defconfig
++++ b/configs/nanopi_neo2_defconfig
+@@ -2,6 +2,7 @@ CONFIG_ARM=y
+ CONFIG_ARCH_SUNXI=y
+ CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-neo2"
+ CONFIG_SPL=y
++CONFIG_SPL_FIT_SOURCE="board/friendlyarm/nanopi-neo2/fit_spl_atf.its"
+ CONFIG_MACH_SUN50I_H5=y
+ CONFIG_DRAM_CLK=672
+ CONFIG_DRAM_ZQ=3881977
+--
+2.25.1
+
diff --git a/configs/friendlyarm_nanopi_neo2_defconfig b/configs/friendlyarm_nanopi_neo2_defconfig
new file mode 100644
index 0000000000..243e5ce66b
--- /dev/null
+++ b/configs/friendlyarm_nanopi_neo2_defconfig
@@ -0,0 +1,49 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_VERSION_VALUE="v2.7"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50i_a64"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.10"
+BR2_TARGET_UBOOT_PATCH="board/friendlyarm/nanopi-neo2/uboot"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_neo2"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_FORMAT_ITB=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="SCP=/dev/null"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.60"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-nanopi-neo2"
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to FriendlyARM NanoPi NEO2"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-neo2/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-neo2/genimage.cfg"
--
2.25.1
More information about the buildroot
mailing list