[Buildroot] [PATCH] configs/mangopi_mq1rdw1_defconfig: new defconfig
Giulio Benetti
giulio.benetti at benettiengineering.com
Fri Dec 15 21:30:19 UTC 2023
Add support for MangoPi MQ1RDW2:
https://mangopi.org/mqr
An Allwinner T113-S3(2xCortex-A7+128MB DDR3-1600 embedded) based SBC
with:
* USB-OTG Type-C socket
* USB-HOST Type-C socket
* 2x 18 pin GPIO headers
* TF card slot
* RTL8723DS WiFi module with ext. antenna connector
* 40 pin RGB FPC connector
* 6 pin CTP FPC connector
* 24 pin DVP FPC connector
* onboard mic
* onboard audio amplifier
* FEL,reset button
Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
---
DEVELOPERS | 2 +
board/mangopi/mq1rdw2/genimage.cfg | 17 +++++++
board/mangopi/mq1rdw2/readme.txt | 46 +++++++++++++++++++
.../boot/extlinux/extlinux.conf | 4 ++
.../rootfs_overlay/etc/network/interfaces | 6 +++
.../rootfs_overlay/etc/wpa_supplicant.conf | 8 ++++
configs/mangopi_mq1rdw2_defconfig | 40 ++++++++++++++++
7 files changed, 123 insertions(+)
create mode 100644 board/mangopi/mq1rdw2/genimage.cfg
create mode 100644 board/mangopi/mq1rdw2/readme.txt
create mode 100644 board/mangopi/mq1rdw2/rootfs_overlay/boot/extlinux/extlinux.conf
create mode 100644 board/mangopi/mq1rdw2/rootfs_overlay/etc/network/interfaces
create mode 100644 board/mangopi/mq1rdw2/rootfs_overlay/etc/wpa_supplicant.conf
create mode 100644 configs/mangopi_mq1rdw2_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 83b970b591..12dd1fdcc9 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1213,6 +1213,7 @@ N: Giulio Benetti <giulio.benetti at benettiengineering.com>
F: board/bananapi/bananapi-m2-ultra/
F: board/freescale/imx6ullevk/
F: board/freescale/imxrt1050evk/
+F: board/mangopi/mq1rdw2
F: board/olimex/a*
F: board/pine64/rockpro64
F: configs/amarula_vyasa_rk3288_defconfig
@@ -1222,6 +1223,7 @@ F: configs/bananapi_m2_ultra_defconfig
F: configs/freescale_imx6ullevk_defconfig
F: configs/imx6ullevk_defconfig
F: configs/imxrt1050-evk_defconfig
+F: configs/mangopi_mq1rdw2_defconfig
F: configs/olimex_a*
F: configs/rockpro64_defconfig
F: package/at/
diff --git a/board/mangopi/mq1rdw2/genimage.cfg b/board/mangopi/mq1rdw2/genimage.cfg
new file mode 100644
index 0000000000..b48e12a831
--- /dev/null
+++ b/board/mangopi/mq1rdw2/genimage.cfg
@@ -0,0 +1,17 @@
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot-sunxi-with-spl.bin"
+ offset = 8K
+ size = 1016K # 1MB - 8KB
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ size = 512M
+ }
+}
diff --git a/board/mangopi/mq1rdw2/readme.txt b/board/mangopi/mq1rdw2/readme.txt
new file mode 100644
index 0000000000..fd37f63154
--- /dev/null
+++ b/board/mangopi/mq1rdw2/readme.txt
@@ -0,0 +1,46 @@
+MangoPi MQ1RDW2
+===============
+
+MangoPi MQ1RDW2 is a tiny ARM Cortex-A7 based single board computer.
+It's built around Allwinner T113-S3 dual core 1GHz CPU with integrated
+128MB DDR3-1600 RAM.
+Board features:
+- USB-OTG Type-C socket
+- USB-HOST Type-C socket
+- 2x 18 pin GPIO headers
+- TF card slot
+- RTL8723DS WiFi module with ext. antenna connector
+- 40 pin RGB FPC connector
+- 6 pin CTP FPC connector
+- 24 pin DVP FPC connector
+- onboard mic
+- onboard audio amplifier
+- FEL,reset button
+
+How to build
+============
+
+$ make mangopi_mq1rdw2_defconfig
+$ make
+
+Wifi
+==========
+
+Edit board/mangopi/mq1rdw2/overlay/etc/wpa_supplicant.conf or
+/etc/wpa_supplicant.conf once connected to the board:
+
+* Replace YOURSSID with your AP ssid
+* Replace YOURPASSWD with your AP password
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Connect a TTL UART to the UART3 on P8 header (unpopulated), insert the microSD card and
+plug in a USB-C cable to the OTG or HOST connector to boot the system.
diff --git a/board/mangopi/mq1rdw2/rootfs_overlay/boot/extlinux/extlinux.conf b/board/mangopi/mq1rdw2/rootfs_overlay/boot/extlinux/extlinux.conf
new file mode 100644
index 0000000000..c190ff7659
--- /dev/null
+++ b/board/mangopi/mq1rdw2/rootfs_overlay/boot/extlinux/extlinux.conf
@@ -0,0 +1,4 @@
+label MANGOPI-MQ1RDW2
+ kernel /boot/zImage
+ devicetree /boot/sun8i-t113s-mangopi-mq-r-t113.dtb
+ append console=ttyS3,115200 root=/dev/mmcblk0p1 rootwait panic=10 ${extra}
diff --git a/board/mangopi/mq1rdw2/rootfs_overlay/etc/network/interfaces b/board/mangopi/mq1rdw2/rootfs_overlay/etc/network/interfaces
new file mode 100644
index 0000000000..89e7d74aff
--- /dev/null
+++ b/board/mangopi/mq1rdw2/rootfs_overlay/etc/network/interfaces
@@ -0,0 +1,6 @@
+auto lo
+iface lo inet loopback
+
+auto wlan0
+iface wlan0 inet dhcp
+wpa-conf /etc/wpa_supplicant.conf
diff --git a/board/mangopi/mq1rdw2/rootfs_overlay/etc/wpa_supplicant.conf b/board/mangopi/mq1rdw2/rootfs_overlay/etc/wpa_supplicant.conf
new file mode 100644
index 0000000000..b43292b0a7
--- /dev/null
+++ b/board/mangopi/mq1rdw2/rootfs_overlay/etc/wpa_supplicant.conf
@@ -0,0 +1,8 @@
+ap_scan=1
+
+network={
+ ssid="YOURSSID"
+ scan_ssid=1
+ key_mgmt=WPA-PSK
+ psk="YOURPASSWD"
+}
diff --git a/configs/mangopi_mq1rdw2_defconfig b/configs/mangopi_mq1rdw2_defconfig
new file mode 100644
index 0000000000..a2f8a1299b
--- /dev/null
+++ b/configs/mangopi_mq1rdw2_defconfig
@@ -0,0 +1,40 @@
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_ARM_FPU_VFPV4=y
+BR2_TARGET_GENERIC_HOSTNAME="mangopi-mq1rdw2"
+BR2_TARGET_GENERIC_ISSUE="Welcome to MangoPI MQ1RDW2"
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS3"
+BR2_SYSTEM_DHCP="eth0"
+BR2_ROOTFS_OVERLAY="board/mangopi/mq1rdw2/rootfs_overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/mangopi/mq1rdw2/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.5"
+BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun8i-t113s-mangopi-mq-r-t113"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_RTL8723DS=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_WPA_CLIENT_SO=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2024.01-rc4"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mangopi_mq_r"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_GENIMAGE=y
--
2.34.1
More information about the buildroot
mailing list