[Buildroot] [PATCH 2/3] configs/rock_pi_4: remove defconfig
Thomas Petazzoni
thomas.petazzoni at bootlin.com
Wed Nov 2 20:18:56 UTC 2022
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3259671395
Cc: Suniel Mahesh <sunil at amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
---
DEVELOPERS | 2 -
board/radxa/rockpi-4/extlinux.conf | 4 --
board/radxa/rockpi-4/genimage.cfg | 39 -------------------
board/radxa/rockpi-4/post-build.sh | 5 ---
board/radxa/rockpi-4/readme.txt | 61 ------------------------------
configs/rock_pi_4_defconfig | 55 ---------------------------
6 files changed, 166 deletions(-)
delete mode 100644 board/radxa/rockpi-4/extlinux.conf
delete mode 100644 board/radxa/rockpi-4/genimage.cfg
delete mode 100755 board/radxa/rockpi-4/post-build.sh
delete mode 100644 board/radxa/rockpi-4/readme.txt
delete mode 100644 configs/rock_pi_4_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 591276bec8..bf839d32d5 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2731,10 +2731,8 @@ F: package/powertop/
N: Suniel Mahesh <sunil at amarulasolutions.com>
F: board/friendlyarm/nanopi-m4
F: board/pine64/rockpro64
-F: board/radxa/rockpi-4
F: board/radxa/rockpi-n8
F: board/radxa/rockpi-n10
-F: configs/rock_pi_4_defconfig
F: configs/rock_pi_n8_defconfig
F: configs/rock_pi_n10_defconfig
F: configs/rockpro64_defconfig
diff --git a/board/radxa/rockpi-4/extlinux.conf b/board/radxa/rockpi-4/extlinux.conf
deleted file mode 100644
index 83374f174a..0000000000
--- a/board/radxa/rockpi-4/extlinux.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-label RK3399_ROCK_PI_4 linux
- kernel /Image
- devicetree /rk3399-rock-pi-4.dtb
- append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
diff --git a/board/radxa/rockpi-4/genimage.cfg b/board/radxa/rockpi-4/genimage.cfg
deleted file mode 100644
index 9f64e96970..0000000000
--- a/board/radxa/rockpi-4/genimage.cfg
+++ /dev/null
@@ -1,39 +0,0 @@
-image boot.vfat {
- vfat {
- files = {
- "Image",
- "rk3399-rock-pi-4.dtb",
- "extlinux"
- }
- }
-
- size = 112M
-}
-
-image sdcard.img {
- hdimage {
- partition-table-type = "gpt"
- }
-
- partition loader1 {
- image = "idbloader.img"
- offset = 32K
- }
-
- partition loader2 {
- image = "u-boot.itb"
- offset = 8M
- }
-
- partition boot {
- partition-type-uuid = F
- bootable = "true"
- image = "boot.vfat"
- offset = 16M
- }
-
- partition rootfs {
- partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae
- image = "rootfs.ext4"
- }
-}
diff --git a/board/radxa/rockpi-4/post-build.sh b/board/radxa/rockpi-4/post-build.sh
deleted file mode 100755
index ba29375c05..0000000000
--- a/board/radxa/rockpi-4/post-build.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
diff --git a/board/radxa/rockpi-4/readme.txt b/board/radxa/rockpi-4/readme.txt
deleted file mode 100644
index 1db7569ed9..0000000000
--- a/board/radxa/rockpi-4/readme.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-RADXA ROCK_PI_4
-================
-https://rockpi.org/rockpi4
-
-ROCK Pi 4 is a Single Board Computer (SBC) from radxa. This guide is valid
-for the below models:
-- ROCK PI 4 Model A
-- ROCK PI 4 Model B
-- ROCK PI 4 Model C
-
-Build:
-======
- $ make rock_pi_4_defconfig
- $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.elf
-├── boot.vfat
-├── extlinux
-├── idbloader.img
-├── Image
-├── rk3399-rock-pi-4.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot.itb
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device.
-
-Booting:
-========
-
-Serial console:
----------------
-RockPi4 has a 40-pin GPIO header. The pin layout is as follows:
-
-pin 6: gnd
-pin 8: tx
-pin 10: rx
-
-Baudrate for this board is 1500000.
-
-Login:
-------
-Enter 'root' as login user, and the prompt is ready.
-
-Wiki link:
-https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/rock-pi-4.html
diff --git a/configs/rock_pi_4_defconfig b/configs/rock_pi_4_defconfig
deleted file mode 100644
index 401a59bac4..0000000000
--- a/configs/rock_pi_4_defconfig
+++ /dev/null
@@ -1,55 +0,0 @@
-# Architecture
-BR2_aarch64=y
-BR2_cortex_a72_a53=y
-
-# Linux headers same as kernel, a 5.4 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_4=y
-
-# Firmware
-BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="cf2747360fdd1eb0d51dd01a984c7c62c7f714fe"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rock-pi-4-rk3399"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.4.46"
-BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-rock-pi-4"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-
-# Filesystem
-BR2_TARGET_GENERIC_HOSTNAME="rockpi4"
-BR2_TARGET_GENERIC_ISSUE="Welcome to ROCK_PI_4"
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_ROOTFS_EXT2_SIZE="96M"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/radxa/rockpi-4/genimage.cfg"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/radxa/rockpi-4/post-build.sh"
--
2.38.1
More information about the buildroot
mailing list