[Buildroot] [PATCH 09/21] configs/friendlyarm_nanopi_m1: remove defconfig
Thomas Petazzoni
thomas.petazzoni at bootlin.com
Tue Nov 1 22:18:49 UTC 2022
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
This defconfig did not even have an entry in the DEVELOPERS file.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499050
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
---
board/friendlyarm/nanopi-m1/boot.cmd | 8 -----
board/friendlyarm/nanopi-m1/genimage.cfg | 37 -------------------
board/friendlyarm/nanopi-m1/readme.txt | 29 ---------------
configs/friendlyarm_nanopi_m1_defconfig | 45 ------------------------
4 files changed, 119 deletions(-)
delete mode 100644 board/friendlyarm/nanopi-m1/boot.cmd
delete mode 100644 board/friendlyarm/nanopi-m1/genimage.cfg
delete mode 100644 board/friendlyarm/nanopi-m1/readme.txt
delete mode 100644 configs/friendlyarm_nanopi_m1_defconfig
diff --git a/board/friendlyarm/nanopi-m1/boot.cmd b/board/friendlyarm/nanopi-m1/boot.cmd
deleted file mode 100644
index b4d612ede7..0000000000
--- a/board/friendlyarm/nanopi-m1/boot.cmd
+++ /dev/null
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-m1.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/friendlyarm/nanopi-m1/genimage.cfg b/board/friendlyarm/nanopi-m1/genimage.cfg
deleted file mode 100644
index 3b2b82ce96..0000000000
--- a/board/friendlyarm/nanopi-m1/genimage.cfg
+++ /dev/null
@@ -1,37 +0,0 @@
-# Minimal SD card image for the NanoPi M1
-#
-image boot.vfat {
- vfat {
- files = {
- "zImage",
- "sun8i-h3-nanopi-m1.dtb",
- "boot.scr"
- }
- }
-
- size = 10M
-}
-
-image sdcard.img {
- hdimage {
- }
-
- partition u-boot {
- in-partition-table = "no"
- image = "u-boot-sunxi-with-spl.bin"
- offset = 8K
- size = 1016K # 1MB - 8KB
- }
-
- partition boot {
- partition-type = 0xC
- bootable = "true"
- image = "boot.vfat"
- }
-
- partition rootfs {
- partition-type = 0x83
- image = "rootfs.ext4"
- size = 512M
- }
-}
diff --git a/board/friendlyarm/nanopi-m1/readme.txt b/board/friendlyarm/nanopi-m1/readme.txt
deleted file mode 100644
index 6a34c4239d..0000000000
--- a/board/friendlyarm/nanopi-m1/readme.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-NanoPi M1
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the NanoPi M1. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
- $ make friendlyarm_nanopi_m1_defconfig
-
-Compile everything and build the SD card image:
-
- $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
diff --git a/configs/friendlyarm_nanopi_m1_defconfig b/configs/friendlyarm_nanopi_m1_defconfig
deleted file mode 100644
index 18cfcb261e..0000000000
--- a/configs/friendlyarm_nanopi_m1_defconfig
+++ /dev/null
@@ -1,45 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_cortex_a7=y
-BR2_ARM_FPU_VFPV4=y
-
-# Linux headers same as kernel, a 5.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
-
-# System configuration
-BR2_TARGET_GENERIC_HOSTNAME="nanopi-m1"
-BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi M1"
-
-# Bootloaders
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_m1"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/friendlyarm/nanopi-m1/boot.cmd"
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
-BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-nanopi-m1"
-
-# Filesystem
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
-BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-m1/genimage.cfg"
-# BR2_TARGET_ROOTFS_TAR is not set
-
-# Additional tools
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
--
2.37.3
More information about the buildroot
mailing list