[Buildroot] [PATCH 1/2] imx8mqevk: readme: Put switch configuration for SD card boot

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at nxp.com>

Improve the documentation by adding the configuration of SW801 and SW802
switches for SD card boot.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
 board/freescale/imx8mqevk/readme.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/board/freescale/imx8mqevk/readme.txt b/board/freescale/imx8mqevk/readme.txt
index d50dd6e..cb7e1dc 100644
--- a/board/freescale/imx8mqevk/readme.txt
+++ b/board/freescale/imx8mqevk/readme.txt
@@ -63,6 +63,9 @@ Boot the i.MX8mq EVK board
 
 To boot your newly created system:
 - insert the SD card in the SD slot of the board;
+- Configure the switches as follows:
+SW801:	ON	ON	OFF	OFF
+SW802:	ON	OFF
 - put a micro USB cable into the Debug USB Port and connect using a terminal
   emulator at 115200 bps, 8n1;
 - power on the board.
-- 
2.7.4