[Buildroot] [PATCH] configs: add raspberrypi3 64bits defconfig
Martin Bark
martin at barkynet.com
Tue Apr 18 10:42:58 UTC 2017
Gaël,
Thanks for working on this. I was about to do this so you saved me a job :)
On 15 April 2017 at 12:37, Gaël PORTAY <gael.portay at savoirfairelinux.com>
wrote:
> This configuration builds a 64bit image for RaspberryPi 3.
>
> Signed-off-by: Gaël PORTAY <gael.portay at savoirfairelinux.com>
> ---
>
> Changes since v1:
> - Symlink raspberrypi3-64 and update BR2_ROOTFS_POST_[BUILD|IMAGE]_SCRIPT
> - Add BR2_cortex_a53 architecture
> - Set BR2_TARGET_ROOTFS_EXT2_BLOCKS to 120000
> - Update kernel repository version
>
> board/raspberrypi/genimage-raspberrypi3-64.cfg | 31 +++++++++++++++++++++
> board/raspberrypi/post-image.sh | 20 ++++++++++++++
> board/raspberrypi3-64 | 1 +
> configs/raspberrypi3_64_defconfig | 38
> ++++++++++++++++++++++++++
> 4 files changed, 90 insertions(+)
> create mode 100644 board/raspberrypi/genimage-raspberrypi3-64.cfg
> create mode 120000 board/raspberrypi3-64
> create mode 100644 configs/raspberrypi3_64_defconfig
>
> diff --git a/board/raspberrypi/genimage-raspberrypi3-64.cfg
> b/board/raspberrypi/genimage-raspberrypi3-64.cfg
> new file mode 100644
> index 000000000..c5f86527d
> --- /dev/null
> +++ b/board/raspberrypi/genimage-raspberrypi3-64.cfg
> @@ -0,0 +1,31 @@
> +image boot.vfat {
> + vfat {
> + files = {
> + "bcm2710-rpi-3-b.dtb",
> + "bcm2837-rpi-3-b.dtb",
> + "rpi-firmware/bootcode.bin",
> + "rpi-firmware/cmdline.txt",
> + "rpi-firmware/config.txt",
> + "rpi-firmware/fixup.dat",
> + "rpi-firmware/start.elf",
> + "Image"
> + }
> + }
> + size = 32M
> +}
> +
> +image sdcard.img {
> + hdimage {
> + }
> +
> + partition boot {
> + partition-type = 0xC
> + bootable = "true"
> + image = "boot.vfat"
> + }
> +
> + partition rootfs {
> + partition-type = 0x83
> + image = "rootfs.ext4"
> + }
> +}
> diff --git a/board/raspberrypi/post-image.sh b/board/raspberrypi/post-
> image.sh
> index b2bb07067..de972998b 100755
> --- a/board/raspberrypi/post-image.sh
> +++ b/board/raspberrypi/post-image.sh
> @@ -16,6 +16,26 @@ dtoverlay=pi3-miniuart-bt
> __EOF__
> fi
> ;;
> + --aarch64)
+ # Run a 64bits kernel (armv8)
> + sed -e '/^kernel=/s,=.*,=Image,' -i "${BINARIES_DIR}/rpi-firmware/
> config.txt"
> + if ! grep -qE '^arm_control=0x200' "${BINARIES_DIR}/rpi-firmware/config.txt";
> then
> + cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/
> config.txt"
> +
> +# enable 64bits support
> +arm_control=0x200
> +__EOF__
> + fi
> +
> + # Enable uart console
> + if ! grep -qE '^enable_uart=1' "${BINARIES_DIR}/rpi-firmware/config.txt";
> then
> + cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/
> config.txt"
> +
> +# enable rpi3 ttyS0 serial console
> +enable_uart=1
> +__EOF__
> + fi
> + ;;
> esac
>
> rm -rf "${GENIMAGE_TMP}"
> diff --git a/board/raspberrypi3-64 b/board/raspberrypi3-64
> new file mode 120000
> index 000000000..fcdafc81e
> --- /dev/null
> +++ b/board/raspberrypi3-64
> @@ -0,0 +1 @@
> +raspberrypi
> \ No newline at end of file
> diff --git a/configs/raspberrypi3_64_defconfig b/configs/raspberrypi3_64_
> defconfig
> new file mode 100644
> index 000000000..f5839dc49
> --- /dev/null
> +++ b/configs/raspberrypi3_64_defconfig
> @@ -0,0 +1,38 @@
> +BR2_aarch64=y
> +BR2_cortex_a53=y
>
The rpi3 has a VFPv4 floating point unit so i think we also
need BR2_ARM_FPU_VFPV4=y
Thanks
Martin
> +
> +BR2_GCC_VERSION_6_X=y
> +BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
> +
> +BR2_SYSTEM_DHCP="eth0"
> +
> +# Linux headers same as kernel, a 4.9 series
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y
> +
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/
> raspberrypi/linux.git"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="5e4ee836560d4c0371e109bf469e1a
> d808ae7a44"
> +BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
> +
> +# Build the DTB from the kernel sources
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2710-rpi-3-b
> broadcom/bcm2837-rpi-3-b"
> +
> +BR2_PACKAGE_RPI_FIRMWARE=y
> +# BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
> +
> +# Required tools to create the SD image
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> +
> +# Filesystem / image
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_BLOCKS=120000
> +# BR2_TARGET_ROOTFS_TAR is not set
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3-64/post-build.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3-64/post-image.sh"
> +BR2_ROOTFS_POST_SCRIPT_ARGS="--aarch64"
> --
> 2.12.1
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.buildroot.org/pipermail/buildroot/attachments/20170418/8ed87bc0/attachment-0001.html>
More information about the buildroot
mailing list