[Buildroot] [git commit] configs/raspberrypi3: sync kernel version with rpi/rpi2

[Peter Seiderer]

Hello Peter, Oscar,

On Tue, 26 Apr 2016 19:51:46 +0200, Peter Korsgaard <peter at korsgaard.com> wrote:

> >>>>> "Peter" == Peter Korsgaard <peter at korsgaard.com> writes:
> 
> >>>>> "Oscar" == Oscar Gomez Fuente <oscargomezf at gmail.com> writes:
>  >> Hi Peter,
>  >> The following models have been checked on a custom buildroot branch of mine
>  >> (with a few changes), but it's based on the Latest stable release of
>  >> buildroot: 2016.02 and before executing a defconfig I executed a make clean
> 
>  >> I've changed:
>  >> BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="3de232825c9ba5989522b8691eb6ac5df6619458"
>  >> BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
> 
>  > Ok, can you please try current git to make sure? We've also updated the
>  > version of rpi-firmware since 2016.02, so that might make a difference.
> 
> FYI, I've built the 3 defconfigs using current git head (except that I
> used precompiled toolchains) and put them online here for easy testing:
> 
> https://buildroot.org/~jacmet/rpi/
> 
> Just dd the sdcard.img matching your board variant to a sdcard. I've
> verified the rpi1 version here.
> 


https://buildroot.org/~jacmet/rpi/rpi1/sdcard.img
Boots fine on a Raspberry Pi Model B Rev 2 board (console on HDMI and serial)

https://buildroot.org/~jacmet/rpi/rpi3/sdcard.img
Boots fine on a Raspberry Pi 3 Model B Rev 1.2 (messages on HDMI,
console on HDMI and serial after adding the 'dtoverlay=pi3-disable-bt' fix).

Regards,
Peter