[Buildroot] [PATCH 1/6] sg3_utils: new package

[Marek Belisko]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
Signed-off-by: Marek Belisko <marek.belisko at streamunlimited.com>
---
 package/Config.in              |    1 +
 package/sg3_utils/Config.in    |   15 +++++++++++++++
 package/sg3_utils/sg3_utils.mk |   33 +++++++++++++++++++++++++++++++++
 3 files changed, 49 insertions(+)
 create mode 100644 package/sg3_utils/Config.in
 create mode 100644 package/sg3_utils/sg3_utils.mk

diff --git a/package/Config.in b/package/Config.in
index 66445ff..afecb8e 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -253,6 +253,7 @@ source "package/rng-tools/Config.in"
 source "package/sane-backends/Config.in"
 source "package/sdparm/Config.in"
 source "package/setserial/Config.in"
+source "package/sg3_utils/Config.in"
 source "package/smartmontools/Config.in"
 source "package/snowball-hdmiservice/Config.in"
 source "package/sredird/Config.in"
diff --git a/package/sg3_utils/Config.in b/package/sg3_utils/Config.in
new file mode 100644
index 0000000..d120e55
--- /dev/null
+++ b/package/sg3_utils/Config.in
@@ -0,0 +1,15 @@
+config BR2_PACKAGE_SG3_UTILS
+	bool "sgutils"
+	depends on BR2_LARGEFILE
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	help
+	  Low level utilities for devices that use a SCSI command set.
+
+	  http://sg.danny.cz/sg/sg3_utils.html
+
+config BR2_PACKAGE_SG3_UTILS_PROGS
+        bool "install programs"
+	depends on BR2_PACKAGE_SG3_UTILS
+
+comment "sgutils requires a toolchain with LARGEFILE and threads support"
+        depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/sg3_utils/sg3_utils.mk b/package/sg3_utils/sg3_utils.mk
new file mode 100644
index 0000000..1c629e8
--- /dev/null
+++ b/package/sg3_utils/sg3_utils.mk
@@ -0,0 +1,33 @@
+#############################################################
+#
+# sg3_utils
+#
+#############################################################
+SG3_UTILS_VERSION = 1.34
+SG3_UTILS_SITE    = http://sg.danny.cz/sg/p/
+
+# install the libsgutils2 library
+SG3_UTILS_INSTALL_STAGING = YES
+
+define SG3_UTILS_REMOVE_PROGS
+	for prog in \
+	        dd decode_sense emc_trespass format get_config \
+		get_lba_status ident inq logs luns map26 \
+	        map sgm_dd modes opcodes sgp_dd persist prevent \
+		raw rbuf rdac read readcap read_block_limits \
+	        read_buffer read_long reassign referrals \
+	        requests reset rmsn rtpg safte sanitize \
+	        sat_identify sat_phy_event sat_set_features scan \
+	        senddiag ses start stpg sync test_rwbuf turs \
+	        unmap verify vpd write_buffer write_long \
+	        write_same wr_mode ; do \
+		$(RM) $(TARGET_DIR)/usr/bin/sg_$${prog} ; \
+	done
+	$(RM) $(TARGET_DIR)/usr/bin/sginfo
+endef
+
+ifneq ($(BR2_PACKAGE_SG3_UTILS_PROGS),y)
+SG3_UTILS_POST_INSTALL_TARGET_HOOKS += SG3_UTILS_REMOVE_PROGS
+endif
+
+$(eval $(autotools-package))
-- 
1.7.10.4